If you want to stop your motorcycle from getting stolen, the best way is to chain it to something solid so that it can’t be moved. Chains and disc-locks will slow a thief down, but unless the bike is physically shackled to an immovable object, then it’s easy for them to simply lift your motorcycle into the back of a truck. Once they’ve done that, they can move it to a place where they can cut through any locks with no risk of getting caught.
But what do you lock the bike to? It needs to be something that can’t easily be cut through or moved, otherwise it’s pointless. You need a ground anchor – a hardened steel loop that you can chain your bike to, permanently secured to the ground, or a wall, so that it cannot be moved quickly or quietly.
There are plenty of ground anchors on the market, but how do you know which are strong enough to protect your motorcycle? One of the toughest standards for motorcycle security products is run by the UK’s Sold Secure. This independent testing lab was originally set up by the British authorities to help consumers choose locks and other security equipment that would offer a better level of protection.
So, ground anchors which have received Sold Secure certification are a safe bet.
There are a few different types of anchor. Some are designed to be sunk into wet concrete that then permanently sets to hold them into place, and these are most commonly placed in the ground. Others can be secured into place using masonry bolts that can attach the anchor either to a concrete base or wall.
Kryptonite Stronghold Anchor
This bolt down ground anchor has a Sold Secure Gold rating for motorcycle security, making it about the strongest you can buy. It’s designed to be bolted to the ground or a wall, and comes with two masonry drill bits (a small one for a pilot hole, and another for the correct bolt size) to help you fit it.
Because the bolt heads are sunk into the body of the anchor itself, they are extremely difficult to remove – the heads cannot easily be ground off with an angle grinder. Once this thing is fitted, it’s not going to come out with a lot of noise and mess.
The surface of the anchor is rounded and the shackle folds down flat so that it can safely be ridden/driven over without damaging your tires. It’s just 1.65inches high with a diameter of 7.5inches. The shackle itself is made of 16mm hardened steel-carbon alloy, so it’s not going to be easy to cut through.
Oxford OF440 Anchor Force Ground Anchor
This Sold Secure Gold rated bolt-down ground anchor uses two hardened steel plates to provide a dual-layered hard target for thieves. The plates are secured to the ground or a wall with four anti-tamper expansion bolts.
Once firmly screwed into the base, these bolts then have a ball bearing and steel plug attached to their heads, which makes it all but impossible to remove them quickly and quietly. If a thief tries to take the bolts out, the plugs just spin harmlessly leaving the anchor securely fastened. Even drilling them out would be hard – the only way to get through is to cut through the two separate plates, which would be noisy and slow.
The advantage of this ground anchor is that it’s large enough to run at least two chains through. So if you need to secure a couple of bikes, or you just want to put extra chains on the same bike, this is idea.
Oxford OF442 Terra Force Ground Anchor
Another Sold Secure Gold rated anchor, the OF442 is designed to be sunk into concrete, making it even harder to attack. It’s pretty easy to install this type of anchor, as you can buy a small bag of ready-mix concrete from most hardware stores. You just need to dig a suitable hole, mix up the concrete and then just set the anchor while it’s still wet – within 24 hours it will be ready. Pro-tip – buy more concrete than you think you need, it’s not expensive and it’s far better to have too much concrete than too little for this kind of job.
The shaft of the anchor has two protruding steel bars running through at right-angles, so once it’s all set into hard concrete there’s no way any motorcycle thief is going to be able to pull it out of the ground. The loop at the top is made of 1 inch thick case-hardened steel, which should resist most kinds of attacks, and the inner loop is a little over 2 inches in diameter so most chains should fit through easily.
Choose this anchor if you want the additional ultra security of having an anchor sunk into concrete, or you just don’t want to do the drilling required for a bolt down anchor.